New pages
- 19:18, 2 November 2017 CandleLightFirmware (hist) [1,744 bytes] EricEvenchick (talk | contribs) (Created page with "The candleLight firmware is an alternative firmware for CANtact which implements the gs_usb protocol. This is supported by the mainline Linux kernel and SocketCAN. It does...")
- 10:05, 8 August 2017 Diezel Sun (hist) [78 bytes] Wels8 (talk | contribs) (Created page with "DiezelSun, Alexander Sergeevich Tatarnikov - famous 3d modeller. == Links ==")
- 02:43, 26 December 2016 CANtact on Raspberry Pi (hist) [5,179 bytes] Markstein (talk | contribs) (first shot)
- 20:29, 20 December 2016 CAN Filters (hist) [2,099 bytes] EricEvenchick (talk | contribs) (Created page with "On busy CAN buses, it can be desirable to filter for only frames that are of importance to the the receiving controller. This filtering is done by arbitration identifier of th...")
- 23:19, 6 December 2016 EricEvenchick (hist) [100 bytes] EricEvenchick (talk | contribs) (Created page with "Eric Evenchick runs Linklayer Labs. You can find him on [https://twitter.com/ericevenchick Twitter].")
- 23:09, 6 December 2016 BLEKey (hist) [2,261 bytes] EricEvenchick (talk | contribs) (Created page with "300px|right '''BLEKey''' is a small device for reading Wiegand data over Bluetooth Low Energy. Wiegand is the protocol most commonly used in card r...")
- 22:14, 6 December 2016 Pyvit (hist) [350 bytes] EricEvenchick (talk | contribs) (Created page with "'''pyvit''' is the Python Vehicle Interface Toolkit. It aims to be a general purpose toolkit for accessing vehicles from Python. While it currently focuses on CAN, there are p...")
- 22:12, 6 December 2016 Cantact-app (hist) [594 bytes] EricEvenchick (talk | contribs) (Created page with "'''cantact-app''' is a Java based GUI for CANtact. At this time, it is intended to be replaced with a new tool based on pyvit. However, it is still a usable tool. The...")
- 22:08, 6 December 2016 SocketCAN (hist) [5,458 bytes] EricEvenchick (talk | contribs) (Created page with "SocketCAN is a collection of CAN drivers and networking tools for Linux. It allows interfacing with CAN bus devices in a similar fashion as other network devices. This allows...")
- 21:37, 6 December 2016 CANtact (hist) [4,844 bytes] EricEvenchick (talk | contribs) (Created page with "400px|right The CANtact device is a single channel USB CAN interface. It can be used to connect to CAN bus systems, including cars, heavy duty vehicles,...")